TOTALLY REPAIR (TRPRT)

As part of the Formula Worx range of floor treatment products, TRPRT- Totally Repair: Patching Compound, Resin Transparent is a high performance, rapid curing, two component, transparent concrete and masonry patching compound. Formulated specifically to fill holes, cracks & joints in concrete and masonry surfaces. Its low viscosity makes it excellent for pouring into cracks, joints & saw-cuts.  It can also be combined with sand, aggregates and colours to match existing materials. With direct bonding properties no priming is required prior to installation.

Features & Benefits:

• Fast setting (20-40 minutes).
• High strength.
• Polishable.
• Heat resistant.
• Transparent.
• Can be coloured.
• Can be bulked out with aggregate for filling larger holes.
• Low viscosity.
• Knife grade.

 Use:

TRPRT is suitable for, (but not limited to), use on the following materials:

• Concrete.
• Bricks.
• Masonry.
• Blockwork.

 Specifications:

• Unique WORX+ formulation.
• Available in 1 litre.

 Application:

1.     Surface must be clean and free of loose material prior to application.

2.     Apply to surfaces by either pouring, using trowel, spatula, scraper or similar.

3.     Product will be ready to grind after 20-60 minutes,

4.     Hardening can be further accelerated by the addition of heat from an external source.  Likewise, colder conditions will slow rate of hardening.

 Mixing:

Add 1-4g of hardening paste to every 100g of TRPRT transparent liquid filler.  Mix both components thoroughly. Depending on ratio, pot life is typically between 3-15 minutes. Ratios above 4% will reduce bonding strength and will leave tacky surface to solidified product.

Product will harden with a yellow tinge if mixed neat.

Additional Information:

Consult Safety Data Sheet / MSDS prior to using material.

TRPRT does not present any health hazards when applied as per instructions in this document and precautions outlined in Safety Data Sheet.